1. Home
  2. Blog and news
  3. Technical capability

Earthworks: what they are and when you need them

Backhoe loading material into a dump truck during earthworks
Excavation, loading and haulage of spoil: the most visible phase of earthworks.

Before building a road, a warehouse, a housing development or an oilfield location, the ground has to be ready to receive the works. That is the job of earthworks, and much of what is built on top depends on how they are carried out.

What are earthworks?

Earthworks are the set of operations that change the natural shape of the ground to bring it to the levels, slopes and conditions the project requires. They include removing material where there is too much (cut), placing and compacting it where there is too little (fill), and leaving the surface shaped for the next stage.

It is not just a matter of moving soil around: poorly compacted fill or badly resolved drainage eventually turns into settlement, cracks or roads that deform with the first rainy season.

The stages, in order

1. Clearing and grubbing

Vegetation, roots and topsoil are removed from the site. This organic material cannot support any structure and is usually set aside for later reuse in green areas.

2. Survey setting-out

Using the topographic survey and the drawings, the axes, boundaries and cut and fill levels are marked on the ground. This is the reference the operators follow throughout the works.

3. Cut and excavation

The ground level is lowered where the project calls for it. The excavated material is sorted: what is suitable is reused as fill, and the rest is disposed of at an authorised site.

4. Fill and compaction

Material is placed in layers of controlled thickness, moistened to the right level and compacted with a roller. Each layer must reach the degree of compaction specified for the project before the next one is placed.

5. Grading, shaping and drainage

The motor grader brings the surface to its final levels and slopes, and the ditches, culverts or channels that will carry water away from the works are built.

Quality control on every layerLaboratory tests and in-situ density tests confirm that the fill meets the specification. Ask for them in writing: they are the proof that the ground will perform.

Equipment involved

EquipmentWhat it is used for
Crawler dozerClearing, pushing material and cutting in hard ground.
ExcavatorDeep excavations, trenches and loading material.
Backhoe loaderVersatile work on smaller projects and trenches.
Dump truckHauling cut, borrow or spoil material.
Motor graderFine grading and shaping of slopes and ditches.
Vibratory rollerCompacting each layer of fill.
Water truckMoistening the material to achieve the right compaction.

When does your project need earthworks?

  • Roads: every new road, whether trunk, urban or agricultural, starts with shaping the subgrade.
  • Housing developments: to create terraces, internal roads and drainage slopes.
  • Warehouses and industry: to obtain a level, load-bearing platform under the slab.
  • Oilfield locations: to build the access roads and the pad where the rig operates.
  • Agribusiness and irrigation: to level plots and build ponds and channels.

What to check before hiring

  1. That the proposal is based on a topographic survey and a soil study, not on a rough estimate.
  2. That it states the cut and fill volumes and where surplus material will be disposed of.
  3. That it specifies the degree of compaction and the tests that will be delivered.
  4. That the contractor has the equipment or guarantees its availability for the whole project.
  5. That the schedule takes the local rainy season into account.

Frequently asked questions

How long do earthworks take?

It depends on the volume of material, the type of soil, site access and the rainy season. A prior topographic survey and soil study allow an accurate estimate.

Is a soil study needed before starting?

Yes. The geotechnical study shows which material can be reused as fill, what has to be removed and what level of compaction the works require.

What is the difference between cut and fill?

Cut removes material to lower the ground level; fill adds and compacts material to raise it. Most projects combine both to balance volumes and reduce the material that has to be bought or disposed of.

Evaluating a project? Tell us the scope and we will tell you which studies you need to get started.

Inversiones Dahmo technical team

Engineering and civil construction from Maracaibo and Caracas.